How to cite this paper

Müldner, Tomasz, Christopher Fry, Jan Krzysztof Miziołek and Scott Durno. “XSAQCT: XML Queryable Compressor.” Presented at Balisage: The Markup Conference 2009, Montréal, Canada, August 11 - 14, 2009. In Proceedings of Balisage: The Markup Conference 2009. Balisage Series on Markup Technologies, vol. 3 (2009). https://doi.org/10.4242/BalisageVol3.Muldner01.

Balisage: The Markup Conference 2009
August 11 - 14, 2009

Balisage Paper: XSAQCT: XML Queryable Compressor

Tomasz Müldner

Professor

Jodrey School of Computer Science, Acadia University

Tomasz Müldner is a professor of computer science at Acadia University in Nova Scotia, one of Canada's top undergraduate universities. He has received numerous teaching awards, including the prestigious Acadia University Alumni Excellence in Teaching Award in 1996. He is the author of several books and numerous research papers. Dr. Müldner received his Ph.D. in mathematics from the Polish Academy of Science in Warsaw, Poland in 1975. His current research includes XML compression and encryption, and website internationalization.

Christopher Fry

Graduate Student

Jodrey School of Computer Science, Acadia University

Christopher Fry graduated in May 2009 from Acadia University with a Bachelor of Computer Science with Honours. He will be returning to Acadia University to pursue his masters degree in computer science

Jan Krzysztof Miziołek

Director

Computing Services Centre for Studies on the Classical Tradition in Poland and East-Central Europe, University of Warsaw, Warsaw, Poland

Jan Krzysztof Miziołek works for the University of Warsaw, Poland. Dr. Miziołek received his Ph.D. in mathematics from Technical University of Lodz, Poland in 1981. He worked on design and implementation of a high-level programming language, LOGLAN-82. His current research includes XML compression and encryption.

Scott Durno

Graduate Student

Jodrey School of Computer Science, Acadia University

Scott Durno graduated in October of 2004 with a Bachelor of Computer Science with Honours degree from Acadia University. He is currently studying at Acadia University pursuing his masters degree in computer science

Copyright © 2009 T. Müldner, C. Fry, J. K. Miziołek, and S. Durno.

Abstract

Recently, there has been a growing interest in queryable XML compressors, which can be used to query compressed data with minimal decompression. At the same time, there are very few applications that have been made available for testing and comparisons. In this paper we report our current work on a novel queryable XML compressor, XSAQCT. While our work is in its early stage, our experiments show that our approach successfully competes with other known queryable compressors.

Table of Contents

1. Introduction
2. Related Work
3. Introduction to XSAQCT
3.1. Basic Terminology
3.2. Architecture of XSAQCT
3.3. Attributes and Mixed Content
3.4. Querying
4. Implementation of XSAQCT
4.1. Building an Annotated Tree
4.2 Decompression
4.2.1 Reannotator
4.2.2 Restorer
5. Results of Experiments
6. Conclusion and Future Work
7. Acknowledgments

1. Introduction

XML (Extensible Markup Language) [xml06] is a meta-language (developed by the W3C, World Wide Web Consortium in 1996), which represents semi-structured data using markups. While the use of XML facilitates the interchange and access of data, its verbose nature tends to considerably increase the size of a data file. This increase in size limits applications of XML, in particular, because of time efficiency of storage on large data files, and because of space considerations of storage on mobile devices. Besides storing (possibly compressed) XML data, one is also interested in being able to query them in order to obtain specific information; such as the information pertaining to all patients who visited the emergency room of a specific hospital in the last year.

The reasons for querying a compressed XML file are:

  1. Querying a compressed XML file is generally faster than completely decompressing the compressed file and then querying it.

  2. Portable devices may not have disk space available for a complete decompression of the XML file.

There are many known XML-aware compressors, i.e. compressors, which can take advantage of XML syntax. Some of these XML compressors are grammar-free, in other words, information available to the compressor is limited to the XML document. Other XML compressors are grammar-based, i.e. the compressor is aware of the grammar for which the input document is valid. Grammar-based compressors may produce better results - in terms of both compression rate and time - than grammar-free compressors because they can take advantage of information available in the grammar, but in many applications the grammar is not known and so this approach is not always practical. In the case of the widely used Wratislava corpus [Skibinski et al, 2007], out of seven XML documents, only two provide an XML Schema (enwikibooks and enwikinews), two reference a DTD (shakespeare and dblp), while the others use no schema. Finally, even if an XML Schema is provided, it may define elements that never actually appear in the XML document to be compressed.

In this paper, we describe a queryable, grammar-free XML compressor, called XSAQCT (pronounced exact). Our technique borrows from other XML compressors in that it separates the document structure from the text values and attribute values (collectively called data values), which makes up the content of the document. What is new in our technique is that we first encode the document to succinctly store information about the input document. Next, we apply the appropriate back-end data compressors to the container that stores the document structure and to the containers storing the data values (the type of the data, derived from the containers, may be used to guide the choice of back-end compressors used for various containers). It is well known that, on average, the structure of the XML document represents between 10 and 20 percent of the size of the entire document, and the remaining 80 percent represents text and attribute values. Since the main focus of our work is on queryable compression, our encoding of the document structure supports lazy decompression, i.e. during the querying process of the compressed document; we decompress “as little as possible”. Well-known XML compressors differ in their use of container granularity; some compressors use a single container, while others tend to create many separate containers for related values. The former approach is based on the promise that standard data compressors achieve better results when they get large data sets, but require complete decompression in order to perform a query. On the other hand, the latter approach may suffer from poor compression ratios, but it requires the decompression of only a few (possibly just one) containers. In our approach, we attempt to strike a balance between these two extremes; using containers that will be large enough so that they can be effectively compressed, but at the same time the container structure does not require a full decompression to answer a query. In addition, while our design supports lazy decompression, it is designed to support future extensions and performs operations directly on compressed data, without any decompression. In what follows, we provide a more detailed description of XSAQCT.

Contributions. There are two main contributions of this paper: (1) an algorithm, which given an XML document D, produces a concise representation of D in a form of an annotated document tree, and stores data values in containers; and (2) the compressor, which compresses the annotated tree and containers, the decompressor, which restores the original document, and the query processor, which operates on a compressed document, and decompresses “as little as possible”. Since the compressor uses a single SAX pass of the input document, our technique is applicable to processing very large XML files and to streaming. In addition, we provide results of our experiments on a representative XML corpus, showing that on average XSAQCT compresses documents in this corpus to 12% of the original file size, and outperforms TREECHOP, the only other XML compressor available for testing.

Currently, XSAQCT only supports simple queries of the form: "/a/b" or "/a/b/text()". Future work will focus on supporting core XQuery queries.

This paper is organized as follows: Section 2 provides related work, and Section 3 describes XSAQCT. Section 4 provides a description the implementation of XSAQCT. Section 5 gives results of testing of our compressor, while conclusions and future work are described in Section 6.

2. Related Work

Existing queryable XML compressors can be classified based on their approach to compression with respect to the structure of the uncompressed XML document and their method of querying the compressed document. Regarding the former, a compressor either retains the original document's structure or separates the structure and the data values; the latter indicates whether or not the queryable compressor features random or sequential queries over the document in the compressed domain.

XGrind [tolani2002] is the earliest XML compressor to support querying of the compressed document and it is DTD schema aware. XGrind features a homomorphic compression scheme where data are encoded using a non-adaptive Huffman algorithm. XPRESS [min03] uses a method called reverse arithmetic encoding to represent unique label paths and a semi-adaptive encoding that provides improved homomorphic compression over XGrind plus the ability to handle some range queries in the compressed domain.

TREECHOP [tre05] is another queryable XML compressor that employs a homomorphic compression scheme and implements a sequential query algorithm and lazy decompression. TREECHOP, like XPRESS, is not schema aware and implements top-down exact-match and range queries of the compressed document. TREECHOP's compression algorithm is highly efficient and the single pass scheme makes it ideal for data exchange across networks.

XQueC [arion07] is a recent queryable XML compressor that separates the structure from the data of the original XML document into the tree structure, separate data containers and a structure summary. XQueC attempts to group data containers to facilitate efficient querying while reducing the costs of storing compressed data and the time required to decompress the document.

XSAQCT is a queryable XML schema-free compressor. The early description of our work appeared in (non-refereed) Dagstuhl Seminar Proceedings [dag08], and here it is extended by the updated versions of all algorithms and results of our experiments.

When dealing with any kind of data compression, one compares their compressor with other compressors, using a specific set of input documents. In this paper, we follow [Skibinski et al] and for our experiments, we use the Wratislavia XML corpus [wra] from this paper.

Binary XML is similar to XML compressors; in that, it allows a more compact form of XML representation, while still retaining the advantage of interoperability of XML. Presently, there are various competing formats of Binary XML including Efficient XML Interchange [exi08] defined by the W3C. While parsing of Binary XML may be faster than parsing regular XML, Binary XML is not particularly designed for query efficiency. Furthermore, Binary XML may be limited in the types of compression used; for example, EXI only allows DEFLATE based compression.

3. Introduction to XSAQCT

In this section we provide the basic terminology, and a general introduction to our compression technique.

3.1. Basic Terminology

XSAQCT can be characterized as (1) a database application, that concentrates on queryable compression with random access, and decompression speed; (2) an interactive compressor that can expect any kind of queries (rather than a batch compressor that know a priori the so-called workloads (containing queries that can be used); (3) a compressor that supports both lossless compression (the only differences between the recreated document and the input document are those permitted by the XML canonicalization process, such as the order of occurrence of attributes; see [can]), and compression, which also allows removal of spurious whitespace; and (4) uses indexing and caching. To our knowledge, currently there is no compressor available with all four attributes.

Two absolute paths are called similar if they are identical, possibly with the exception of the last component, which is the data value. For example, the paths /a/b/t1 and /a/b/t2 are similar while the paths /a/b/t1 and /a/c/t1 are not.

3.2. Architecture of XSAQCT

The top-level description of the architecture of the XSAQCT compressor is as follows. First, the input file is compressed. Then the user can start a session, during which the compressed file is queried and/or decompressed to recreate the original file. More details of the architecture are provided in Figure 1, in which shaded boxes represent intermediate stages of the compression.

fig_process

The architecture of XSAQCT.

Given a document D, we perform a single SAX traversal of D to encode it; creating an annotated tree (TA,D). At the same time, data values are written to the appropriate data containers. Note that TA,D provides a faithful but succinct representation of the structure of the input document D. Next, TA,D is compressed by first writing its annotations to one container and the skeleton tree (TD) without annotations to another container. Finally, all remaining containers are compressed, using user specified back-end compressors, and written to create the compressor’s output CD.

This approach resembles a permutation-based approach, in which a document is re-arranged to localize repetitions. However, in our work, TA,D preserves all information about the ordering of elements, and a single container stores only related data values (specifically, we use a single container to store text values for all similar paths). Each container may be compressed using different back-end compressor, depending on the type of value in the container (the encoded information about the selected back-end compressor is added to the container). In other words, our approach is in a sense a homomorphic approach, but the annotated tree never has two or more similar paths (they have been “merged” into a single path). The main back-end compressors used include GZIP [gzip], BZIP2 [bzip2] and PAQ8 [paq], but the user can add more compressors.

The decompressor has the following logical passes (more details of the actual implementation are provided in Section 4.2):

  1. use the back-end decompressors to restore the contents of all containers

  2. re-annotation: use (retrieved from containers) annotations and the skeleton tree TD to recreate TA,D

  3. restoring: use TA,D to restore the decompressed file

Example 1. Consider the document D, shown as the document tree without any data values, in Figure 2. Here, there are three similar paths /a/b/c and two similar paths /a/b/e.  Note that in this example, we concentrate on handling elements and describe handing attributes and text values in Section 3.3.

fig2

The document D.

The annotated tree TA,D, which represents D, is shown in Figure 3. Similar paths have been merged, for this example there is only one path /a/b/c and one path /a/b/e. To support decompression, annotations have been added to the nodes of the tree TA,D.

fig_annotated_tree

The annotated tree TA,D.

Let’s use this example to explain the idea behind annotations. In this example, as well in most examples we investigated, the document tree is wide, while the corresponding annotated tree is much narrower (both trees always have the same height). The annotation associated with node n, which is a child of the node m, provides the information as to the number of children of m, labeled by n. Specifically, in this example, the node “b” in TA,D is annotated with [3], because there are three children labeled by “b” of the node “a” in the document D. Now, consider the node “e” in TA,D. This node is annotated with [0,0,2], because in the document D, there are no children labeled “e” for the first two occurrences of the node “b”, and there are two children labeled “e” for the third occurrence of the node “b”.

Now, we summarize some properties of the annotated tree TA,D for the document D. First of all, the height of D is equal to the height of TA,D.  For a node A of TA,D, consider its annotation ann(A) = [a1,…,ak] and let |ann(A)| be the number of integers in the ann(A), {A} be the sum of a1,…,ak. Then, the following properties hold:

3.1 In D, there are a1,…,ak occurrences of A

3.2 If A has children B1,…,Bm in TA,D, then

  1. ann(Bj) = [bj,1,…,bj,{A}], i.e. the number of integers in the annotation of each child is equal to the sum of integers in the annotation of the parent

  2. in D, the node Aj has:

    bj,1 children labeled by B1

    bj,{A} children labeled by B{A}

For Example 1, and the node “b” in TA,D, we have ann(b) = [3] and from 3.1, there are three occurrences of the node “b” in D. From 3.2 a), annotations of children of this node have three integers. To show an example of 3.2b), consider Figure 11 and the node ”$”, which is a child of the node “a”, and has two children; “s”, annotated by [1,2,0,1,0] and “z”, annotated by [0,1,1,0,0]. As the Figure 12 shows, there are five corresponding occurrences of the node “$” in D; with the following children:

  • the first occurrence of “$” has one child labeled by “s” and no children labeled by “z”

  • the second occurrence of “$” has two children labeled by “s” and one child labeled by “z”

  • the third occurrence of “$” has no children labeled by “s” and one child labeled by “z”

  • the fourth occurrence of “$” has one child labeled by “s” and no children labeled by “z”

  • the fifth occurrence of “$” has no children.

For any element s, which may appear a various number of times as a child of the same node, in our figures, the element s will have an appended *. Element s is called dirty if it has an appended *; otherwise it is called clean. The only clean element in Figure 2 is the one labeled with “c”.  Since clean nodes always appear exactly once, they are not actually being annotated. However, for the sake of clarity in Figure 3, we showed all annotations.

The next section describes handing of attributes and mixed content.

3.3. Attributes and Mixed Content

Attributes are treated as if they were elements, i.e. their names (preceded by “@”), and annotations are recorded in TA,D. Figure 4 shows a simple document with various text nodes, including mixed content. The tree TA,D is shown in Figure 5, and text containers (the bottom of the figure). Nodes of the tree are marked with a asterisk in Figure 5, if the corresponding element has mixed content, and in such a case empty text (shown as a box containing “0”) is inserted in the text container when needed. All annotations appear in a separate container, with the pointer from each node pointing to the beginning of its annotations (the length of the annotation can be computed using the property 3.2 from Section 3.2). Note that the Figure 5 shows the logical format for the annotated tree TA,D,  more details of the actual implementation are provided in Section 4.

fig_4

Handling mixed content.

fig_5

Tree TA,D and text containers.

3.4. Querying

At the time of writing this paper, our query processor was under development, and only simple queries have been implemented (specifically, we have implemented absolute paths; similarly to TREECHOP [tre05], but additionally including some predicates such as “position()=2”). A query, which ends in an element, can be immediately answered using the annotated tree, and therefore it only requires a decompression of this tree. Now, consider a query, which calls for text values for a given path. As mentioned earlier, the compressor creates a separate container storing all values for similar paths (comp. Figure 4 and Figure 5). Therefore, to answer this type of a query it is enough to decompress a single data container, and then return the text values stored in this container. Since text values are stored within a container in a dfs-order, a query that calls for a specific text value (such as the i-th value) can be answered by traversing a single decompressed container to locate the i-th value.

Example 2. Consider the document D shown in Figure 4 and Figure 5. Now, consider the following queries:

  1. /a/b

    Based on the annotated tree, the answer is {b, b, b}

  2. /a/b/c/text()

    Based on the annotated tree, the first container is decompressed and its content {t8, t9, t13} is returned.

  3. /a/b[2]/c/text()

    Based on the annotated tree and the second container, the answer is {t9}.

4. Implementation of XSAQCT

In this section, we first describe building the annotated tree, and next the re-annotator and restorer used in decompression.

4.1. Building an Annotated Tree

We will say that a document D has a cycle if there exists a node n in D such that there are two children x and y of n, which satisfy this condition: x < y and y < x (here, “<” denotes the document order). If there are cycles, then add a “dummy tag name” to the annotated tree TA,D, here denoted by $, which will be used to avoid cycles. The annotated tree TA,D may have dummy nodes, and if so they will be removed by the decompressor to recreate the original document.

Cycles may occur in the following two cases:

  1. Node NA appears before node NB and then NA appears after NB, where NA and NB have the same parent node. For example:

    <parent>
    	<a></a>
       	<b></b> 
       	<a></b> 
    </parent>
  2. NA appears before NB and both are the children of the same Nparent1. Later NB appears before NA and both are children of a different node Nparent2 where Nparent1 and Nparent2 have the same path (i.e. they both have the same ancestor in the Skeleton Tree). For example:

    <super_parent> 
       	<parent> 
       		<a></a> 
       		<b></b> 
       	</parent> 
       	<parent> 
       		<b></b> 
       		<a></a> 
       	</parent> 
    </super_parent>

During parsing, it is unclear whether the Skeleton Tree should place the corresponding element of node a before or after node b. Either choice would cause the compressed file to be incorrect, because either all a's would appear before all b's or all b's would appear before all a's. Therefore, our algorithm creates multiple graphs, which are later topologically sorted. A topological sort can also be used to detect cycles in a graph. Here, the vertices of the graph are the child elements of some parent element in TA and the edges between these child elements are created during parsing. If the topological sort reveals a cycle in this graph then this situation can be handled by adding a dummy node to the parent element.

Example 3. Document D (which has cycles on x and y) is shown in Figure 6.

fig_6

Sample document D.

The annotated document tree (with dummy nodes) is shown in Figure 7.

fig_7

The annotated document tree.

The restored document tree (with dummy nodes) is shown in Figure 8.

fig_8

Restored document tree of D (with dummy nodes).

Algorithm 4.1

Input: An XML document D.

Output: An annotated document tree TA,D.

To describe details of the process of building the annotated document tree, we use the following notations:

  1. ann($)+=1 means: if the annotation of $ ends with “,” then append “1,”; otherwise append “,”

  2. ann(x)+= 1 (for another annotation) means: if this annotation ends with “,” then append “0,”; otherwise append “,”

  3. There is a table T, each row has 3 entries: a full path, a graph associated with this path, as in the previous description, (possibly one node of this graph is “current” – see below), and an annotation for $ (this entry may be empty)

  4. “close(absolute path p)” means: for each node x in the graph associated with p perform ann(x)+=1, and also if path p has a non-empty annotation for “$” then perform ann($)+=1

  5. “cycle(x)” means that we are considering the node x and adding x to the graph would create a cycle (e.g. if we have a graph: a ← b and we want to add a node a; this would create a cycle a ← b ← a)

Method: Elements are added to the annotated tree when they are encountered for the first time. We use a single SAX [SAX] traversal of the document D and perform the following actions:

  1. Going up from the node x to y: if x was the last (rightmost) child of y and so the next action would be going up to the parent of y, then close(x) and unset the current node in the graph

  2. Going down to node x:

    - try to add x to the appropriate graph (see example below)

    -if a cycle would be created then close(x) (see 4), then add 1 to ann(x), and increment by 1 the annotation of $ (if such annotation does not exist or it ends with “,”, then create it and initialize to 2)

    - if no cycle would be created, then add x to the graph (a new node, or just increment the annotation of existing x), and make it current node in the graph

  3. After completion, check annotations and add leading 0’s for regular nodes and 1’s for dummies (i.e. $’s).

Example 4. Consider a document D shown in Figure 9. Here, we use indices for explanations, e.g. a1 is just a.

fig_9

Sample document D.

Table 1 shows all major steps in creating the annotated document tree for the document D from Figure 8; for each step there is a description (if required) specifying which node of the document is encountered during the SAX traversal, wherever there is a change then a path and its graph (the graph is not shown if it is empty), and the annotation of $ if it exists. The current node is shown in bold. Entries for leaves (where graphs are empty) are omitted. When appropriate, we show below the path and the graph; e.g. (/r   a[1]) indicates the graph consisting of a single node a, annotated by 1, for the path “/r”). Only the paths/graphs that have changed from the previous step are shown. Sometimes “empty graphs” are omitted.

Table I

Trace of the execution of Algorithm 4.1.

Step #

Action

Annotations

$

1

Root r

Graph /r

2

a1

(/r, a[1])

(/r/a, empty)

3

s1

(/r/a, s[1])

4

Go up to a1; close(/r/a), unset current

(/r/a, s[1,]

5

Go to b1, add a new node b to the graph for /r and an edge between b and a

(/r, a[1]<- b[1])

6

Go to t1

(r/b/, t[1])

7

Go to x1

(/r/b/t, x[1])

8

Go to y1; try to add an edge between y and x (because x is current)

(/r/b/t, x[1]<-y[1])

9

Go to x2: this would have created a cycle. Use a rule for a cycle (above)

(/r/b/t, x[1,1]<-y[1,])

$[2]

10

Go up to t1, no occurrence of y

Close /r/b/t: not current anymore.

(/r/b/t, x[1,1,]<-y[1,0,])

$[2,]

11

Go to b1, close /r/b/

(/r/b, t[1,])

12

a2: cycle

(/r, a[1,1]<-b[1,])

$[2]

13

s2

(/r/a, s[1,1])

14

u1

(/r/a/s, u[1])

15

Go up to s2: close

(/r/a/s, u[1,])

16

s3:

(/r/a, s[1,2])

17

w1: the graph consists of 2 isolated

nodes (because it had no current before)

(/r/a/s, u[1,] w[1])

18

u2, no cycle

(/r/a/s, w[1]<-u[1,1])

19

s3: close

(/r/a/s, w[1,]<-u[1,1,])

20

z1

(/r/a, s[1,2]<-z[1])

21

a2: close

(/r/a, s[1,2,]<-z[1,])

22

a3

(/r, a[1,2]<-b[1,])

$[2]

23

z2

(/r/a, s[1,2,]<-z[1,1])

24

s4: cycle

(/r/a, s[1,2,0,1]<-z[1,1,])

$[2]

25

Close /r/a/s

(/r/a/s, w[1,0,]<-u[1,1,0,])

26

Up to a3; close

(/r/a, s[1,2,0,1,]<-z[1,1,0,])

$[2,]

27

b2:

(/r, a[1,2]<-b[1,1])

$[2]

28

t2:

 (/r/b, t[1,1])

29

Up to b2: close

(/r/b/t, x[1,1,0,]<-y[1,0,0,])

$[2,1,]

30

Up: close

(/r/b, t[1,1,])

31

b3

(/r, a[1,2]<-b[1,2])

$[2]

32

t3

(/r/b/, t[1,1,1])

33

y2

(/r/b/t, x[1,1,0,]<-y[1,0,0,1])

$[2,1,1]

34

Up: close

(/r/b/t, x[1,1,0,0,]<-y[1,0,0,1,])

$[2,1,1,]

35

t4

(/r/b, t[1,1,2])

36

x3

(/r/b/t, x[1,1,0,0,1]<-y[1,0,0,1,])

$[2,1,1,]

37

y3

(/r/b/t, x[1,1,0,0,1]<-y[1,0,0,1,1])

$[2,1,1,]

38

Up to t4: close

(/r/b/t,x[1,1,0,0,1,]<-y[1,0,0,1,1,])

$[2,1,1,1,]

39

Up to b3: close

(/r/b, t[1,1,2,])

40

a4: cycle

(/r, a[1,2,1]<-b[1,2,])

$[3]

41

Finish: close /r/a and then /r

(/r/a, s[1,2,0,1,0,]<-z[1,1,0,0,])

(/r, a[1,2,1,]<-b[1,2,0,])

$[2,1,]

$[3,]

Note: we will add leading 0’s and 1’s when creating the annotated document tree in order to make sure that the number of positions in the annotations is correct. The annotated document tree created from the above table is shown in Figure 10.

fig_10

The incomplete annotated document tree.

The annotated document tree in which leading 0’s are added to node annotations and leading 1’s are added to $’s annotations is shown in Figure 11.

fig_11

The complete annotated document tree.

The restored document tree obtained from the complete annotated tree, in which dummy nodes are not removed, is shown in Figure 12.

fig_12

The restored document tree (dummy nodes are not removed).

It is easy to see that removing dummy nodes from the tree shown in Figure 12 will produce the original document tree shown in Figure 9.

4.2 Decompression

The skeleton tree TD is first re-annotated to create the annotated tree TA,D, and then TA,D is used to output the restored document. Reannotator performs a dfs-traversal of TD and fetches annotations from their respective container (see Figure 4), using the property 3.2 from Section 3.2. Details of the reannotator follow.

4.2.1 Reannotator

Here, we use a global variable, called number, initialized to 1.

re-ann(SkeletonTreeNode current) 
{
	for every child c of current 
	{
		if(clean(c)) 
			annotate c with “number” of 1’s
		else 
		{ // dirty c
			fetch “number” digits from Seq and store into the sequence “els”
			annotate c with “els”
			number = sum of all digits in “els”
		}
   		re-ann(c)
   	}
 	number = sum of all digits in the annotation of n
}

4.2.2 Restorer

Finally, the restorer performs a dfs-traversal of TA,D to output the document D:

re-ann(root of SkeletonTreeNode)
output <tag of the root>
d-dfs(root of SkeletonTreeNode)
output <\end of tag for the root>

where d-dfs() is described below using the following notations (1) ann(n) is the first digit in the annotation of the node n; (2) chop(n) results in removing the first digit in the annotation of n (always 0); (3) dec(n) decrements by one the first digit in the annotation of n (never 0); and (4) LC(n) and RS(n) denote respectively the leftmost child and right sibling of n.

d-dfs(SkeletonTreeNode c) 
{
	Node n
	n= LC(c)
	while(n <> 0) 
	{
 		if(ann(n)>0) 
		{
			output “<” + tag_of_n + “>”
			d-dfs(c)
		} 
		else chop(n)
		n = RS(n)
	}
	dec(c)
	output “<\” + tag_of_c + “>”
	if(ann(c)==0) chop(c)
	else {
		output “<” + tag_of_c + “>”
		d-dfs(c)
	}
}

5. Results of Experiments

The initial implementation of our compressor was completed using Java and Xerces. The time taken to compress the XML files on the Wratislavia corpus are reported in Table 2.

Table II

Compression time of XSAQCT

Compression time in seconds

XML File

XSAQCT using GZIP

TREECHOP Compression

dblp

39.9

25.16

enwikibooks

23.3

25.06

enwikinews

7.7

7.67

lineitem

4.4

5.66

shakespeare

3.7

2.59

SwissProt

29.8

20.43

uwm

1.3

1.2

The compression rate results of our experiments are reported in Table 3. The results of our experiments on the Wratislavia corpus are reported in the following table. XSAQCT allows use of different data compressors such as two well-known fast compressors GZIP and BZIP2, and PAQ8o8 (the best compression rate and the expenses of compression time). Our results show that for this corpus (when using BZIP2 for compression) XSAQCT considerably shrinks their sizes to 12% (on average) of the original sizes.

Table III

Size of compressed XML documents

Compressed Size in Bytes

XML File

XSAQCT using GZIP

XSAQCT using BZIP2

XSAQCT using PAQ8o8

TREECHOP

Uncompressed Size

dblp

19,436,979

14,386,289

10,331,426

22,757,793

133,862,735

enwikibooks

44,501,499

36,587,294

25,534,846

44,838,217

156,300,597

enwikinews

12,595,156

9,599,207

6,634,071

12,681,978

46,418,850

lineitem

1,436,510

993,735

848,494

2,327,681

32,295,475

shakespeare

1,896,034

1,441,177

1,168,917

2,016,475

7,894,983

SwissProt

7,515,915

5,852,123

4,118,792

12,384,686

114,820,211

uwm

102,986

87,895

66,887

126,744

2,337,522

Table 4 shows the time taken to query various simple paths using both XSAQCT and TREECHOP. Each of the seven XML files in the corpus were queried using two different query paths and the time taken to process each query is shown in seconds. XSAQCT queried each path faster than TREECHOP and the difference in query time tended to be larger when larger XML files were queried (e.g. dblp and SwissProt). The biggest difference in times taken to query by XSAQCT and TREECHOP is seen when querying with the path '/mediawiki/siteinfo/sitename'. The element sitename only appears once in the entire document; this means that XSAQCT can easily extract the contents of sitename's container, whereas TREECHOP must find the text data of sitename by searching the entire compressed file.

Table IV

Query Time of XSAQCT

Query Time in seconds

File Name

Query

XSAQCT

TREECHOP

dblp.xml

/dblp/article/cdrom

10.92

15.49

dblp.xml

/dblp/mastersthesis/@key

10.76

15.15

enwikibooks-20061201-pages-articles.xml

/mediawiki/page/revision/text/@xml:space

2.44

14.6

enwikibooks-20061201-pages-articles.xml

/mediawiki/siteinfo/sitename

0.65

12.75

enwikinews-20061201-pages-articles.xml

/mediawiki/page/revision/contributor/username

1.57

5.49

enwikinews-20061201-pages-articles.xml

/mediawiki/page/title

3.83

5.54

lineitem.xml

/table/T/L_COMMENT

5.49

6.22

lineitem.xml

/table/T/L_ORDERKEY

1.96

5.06

shakespeare.xml

/PLAYS/PLAY/TITLE

0.65

1.56

shakespeare.xml

PLAYS/PLAY/ACT/SCENE/STAGEDIR

1.06

1.44

SwissProt.xml

/root/Entry/@id

7.93

17

SwissProt.xml

/root/Entry/Ref/Comment

9.08

16.63

uwm.xml

/root/course_listing/course

0.45

1.11

uwm.xml

/root/course_listing/restrictions/A/@HREF

0.31

0.8

The time taken to decompress the compressed XML corpus files is shown in Table 5. In most cases XSAQCT decompresses faster than TREECHOP (five out of seven files) and in the remaining cases has a decompression time that is not much longer than TREECHOP's.

Table V

Decompression Time of XSAQCT

Decompression Time in seconds

File Name

XSAQCT

TREECHOP

dblp.xml

24.52

26.39

enwikibooks-20061201-pages-articles.xml

13.49

20.55

enwikinews-20061201-pages-articles.xml

4.51

7.23

lineitem.xml

3.84

6.17

shakespeare.xml

4.01

2.49

SwissProt.xml

24.04

27.44

uwm.xml

1.78

1.51

Other results on the Wratislavia corpus are shown in Table 6. This includes the number of total nodes in the skeleton tree, the number of dummy nodes, the size of the skeleton tree uncompressed and the size compressed.

Table VI

Compressed XML document Skeleton Tree information.

uwm

shakespeare

lineitem

swissprot

enwikinews

enwikibooks

dblp

Nodes in ST

43

155

37

394

50

50

313

Number of dummy nodes

0

9

0

2

0

0

10

ST size uncompressed

384

1051

383

3495

467

467

2248

ST size compressed

211

309

200

779

251

251

570

6. Conclusion and Future Work

In this paper, we described our current work on a queryable XML compressor, which uses lazy decompression. While this work is in its early stage, the design of this compressor and the results of our experiments indicate that it successfully competes with other known queryable XML compressors. Our future work includes (1) improving the compression time by rewriting the code using C++ rather than Java; (2) building a complete query processor.

7. Acknowledgments

Chris Fry implemented and tested all algorithms described in this paper. The work of the first author was partially supported by the NSERC RGPIN grant (2004-2009).

References

[ski07] P. Skibiński, Sz. Grabowski, and J. Swacha - "Effective asymmetric XML compression", Software - Practice & Experience, 2007/2008. doi:https://doi.org/10.1002/spe.v38:10.

[dag08] Tomasz Müldner, Christopher Fry, Jan Krzysztof Miziołek, Scott Durno, SXSAQCT and XSAQCT: XML Queryable Compressors, Dagstuhl Seminar Proceedings 08261, 2008.

[xml06] Extensible Markup Language (XML) 1.0 (3rd ed.). http://www.w3.org/TR/REC-xml/.

[exi08] Efficient XML Interchange (EXI) Format 1.0. http://www.w3.org/TR/exi/.

[tre05] Gregory Leighton, Tomasz Müldner, James Diamond, TREECHOP: A Tree-based Query-able Compressor For XML. In Proceedings of the Ninth Canadian Workshop on Information Theory (CWIT 2005), pages 115-118, 2005.

[gzip] The gzip home page. http://www.gzip.org

[bzip2] The bzip2 home page. http://www.bzip.org

[paq] The PAQ home page. http://cs.fit.edu/~mmahoney/compression/#paq

[can] XML Canonical XML Ver. 1.0. http://www.w3.org/TR/xml-c14n.html

[SAX] Simple API for XML (SAX). http://www.saxproject.org/

[tolani2002] XGRIND: A Query-Friendly XML Compressor. ICDE, 2002. doi:https://doi.org/10.1109/ICDE.2002.994712.

[xiaofeng03] XSeq: An Indexing Infrastructure for Tree Pattern Queries. SIGMOD 2004. doi:https://doi.org/10.1145/1007568.1007709.

[min03] J. Min, M. Park, C. Chung: XPRESS: A Queriable Compression for XML Data. SIGMOD 2003. doi:https://doi.org/10.1145/872757.872775.

[arion07] A. Arion, A. Bonifati, I. Manolescu and A. Pugliese: XQueC: A Query-Conscious Compressed XML Database. ACM TOIT 7(2), 2007. doi:https://doi.org/10.1145/1239971.1239974.

[wra] Wratislava XML Corpus. http://www.ii.uni.wroc.pl/~inikep/research/Wratislavia/

×

P. Skibiński, Sz. Grabowski, and J. Swacha - "Effective asymmetric XML compression", Software - Practice & Experience, 2007/2008. doi:https://doi.org/10.1002/spe.v38:10.

×

Tomasz Müldner, Christopher Fry, Jan Krzysztof Miziołek, Scott Durno, SXSAQCT and XSAQCT: XML Queryable Compressors, Dagstuhl Seminar Proceedings 08261, 2008.

×

Extensible Markup Language (XML) 1.0 (3rd ed.). http://www.w3.org/TR/REC-xml/.

×

Efficient XML Interchange (EXI) Format 1.0. http://www.w3.org/TR/exi/.

×

Gregory Leighton, Tomasz Müldner, James Diamond, TREECHOP: A Tree-based Query-able Compressor For XML. In Proceedings of the Ninth Canadian Workshop on Information Theory (CWIT 2005), pages 115-118, 2005.

×

The gzip home page. http://www.gzip.org

×

The bzip2 home page. http://www.bzip.org

×

XML Canonical XML Ver. 1.0. http://www.w3.org/TR/xml-c14n.html

×

Simple API for XML (SAX). http://www.saxproject.org/

×

XGRIND: A Query-Friendly XML Compressor. ICDE, 2002. doi:https://doi.org/10.1109/ICDE.2002.994712.

×

XSeq: An Indexing Infrastructure for Tree Pattern Queries. SIGMOD 2004. doi:https://doi.org/10.1145/1007568.1007709.

×

J. Min, M. Park, C. Chung: XPRESS: A Queriable Compression for XML Data. SIGMOD 2003. doi:https://doi.org/10.1145/872757.872775.

×

A. Arion, A. Bonifati, I. Manolescu and A. Pugliese: XQueC: A Query-Conscious Compressed XML Database. ACM TOIT 7(2), 2007. doi:https://doi.org/10.1145/1239971.1239974.